Showing posts with label video. Show all posts
Showing posts with label video. Show all posts
Tuesday, February 4, 2014
A Boring Video
I needed shelf standards for an existing cabinet, but wanted wooden rather than metal. I decided to make four standards with evenly spaced holes, using the In-line Drilling jig I used to drill the holes for the Christmas Star I made for a friend. The standards only needed to be 27" long, so I decided to use the Mortise & Tenon jig that I am currently developing to hold the work pieces.
The M&T jig allows me to clamp work pieces vertically or horizontally for routing with the EZ Smart Router Kit (SRK). The work piece can be registered for repeatability. It can handle work pieces up to 32" long. I will be doing a post on the M&T jig once I have finished developing it or at least gotten it to a point where it will be readily usable without having to make or modify something. Briefly, the work piece is clamped between the top of the jig and a height adjustable table. At this time I am using pieces of scrap and clamps to hold the work Piece tight against the body of the jig. I will probably be using cam clamps to hold the work piece in place once I work out how I want to attach them so that their location will be adjustable.
The In-line Indexer fastens to the rail of the M&T jig, and is locked in place once I set the SRK to align with the first hole marked on the work piece. To do this, I use a setup bit in the router and align the point with the the center of the first hole location. Making sure that the index pin is in a hole, I tighten the clamps on the indexer. I replace the setup bit with a 1/4" spiral (up cut) bit and start drilling.
This short video shows how EZ it is to drill the holes for a standard. Note the hesitations in raising the index pin when I start trying to move the router before raising the pin. I need to get the process down a little better.
Read More..
The M&T jig allows me to clamp work pieces vertically or horizontally for routing with the EZ Smart Router Kit (SRK). The work piece can be registered for repeatability. It can handle work pieces up to 32" long. I will be doing a post on the M&T jig once I have finished developing it or at least gotten it to a point where it will be readily usable without having to make or modify something. Briefly, the work piece is clamped between the top of the jig and a height adjustable table. At this time I am using pieces of scrap and clamps to hold the work Piece tight against the body of the jig. I will probably be using cam clamps to hold the work piece in place once I work out how I want to attach them so that their location will be adjustable.
The In-line Indexer fastens to the rail of the M&T jig, and is locked in place once I set the SRK to align with the first hole marked on the work piece. To do this, I use a setup bit in the router and align the point with the the center of the first hole location. Making sure that the index pin is in a hole, I tighten the clamps on the indexer. I replace the setup bit with a 1/4" spiral (up cut) bit and start drilling.
This short video shows how EZ it is to drill the holes for a standard. Note the hesitations in raising the index pin when I start trying to move the router before raising the pin. I need to get the process down a little better.
Sunday, January 26, 2014
A Short Video Tour of Dorset Custom Furniture
"
Heres a very brief visual and oral history of Dorset Custom Furniture. Weve been working on it for a while now and it was harder than I thought. What to include? What to cut? .. a whole new process ... Duncan Lake of Junction 133 Productions got it all together for us. Hes been a friend of Sam and Wills for a long time and did a great job ... Hes back at his day job for the season now, videoing snowboarders out west ... Looks like fun ...
ps ... this video shows best if you click it to full screen
Read More..
Dorset
Heres a very brief visual and oral history of Dorset Custom Furniture. Weve been working on it for a while now and it was harder than I thought. What to include? What to cut? .. a whole new process ... Duncan Lake of Junction 133 Productions got it all together for us. Hes been a friend of Sam and Wills for a long time and did a great job ... Hes back at his day job for the season now, videoing snowboarders out west ... Looks like fun ...
ps ... this video shows best if you click it to full screen
Subscribe to:
Posts (Atom)